D-Link DWS-4026 Product Manual - Page 153

Software User Manual 12/10/09 D-Link Unified Access System Table 69: DHCP Server Global Configuration Fields (Cont.) Field Bootp Automatic Mode Enable Disable Add Excluded Addresses From To Delete Excluded Addresses Description Specifies whether to enable or disable Bootp for dynamic pools. Allows the allocation of the addresses in the automatic address pool to the BootP client. Does not use the automatic address pool addresses for BootP clients. This is the default value. Use the From and To fields to specify the IP addresses that the server should not assign to the client. If you want to exclude a range of addresses, set the range boundaries. Note: It is strongly recommended not to add thousands of addresses in the range. The larger the range, more time will be taken by the DHCP server to assign an IP address. To exclude an address range, specify the low address in the range.To specify a single address to exclude, enter the address in the From field and leave the To field at the default value of 0.0.0.0. For example, in Figure 85, the user is adding the address 192.168.17.100 to the excluded addresses list. To exclude an address range, specify the high address in the range. To exclude a single address, do not enter a value in this field. After you add excluded addresses, they appear below this field title, as Figure 85 shows. Each address or address range has a check box next to it. • If you change any settings or add an excluded address range, click Submit to apply the changes to the system. Each time you enter a value in the From or To fields, click Submit to add the address or address range to the excluded address list. • To Delete an address or address range from the excluded address list, select one or more check box beneath the Delete Excluded Addresses field and click Submit. Document 34CSFP6XXUWS-SWUM100-D7 Managing the DHCP Server Page 153