D-Link DWS-4026 Product Manual - Page 361

Software User Manual 12/10/09 D-Link Unified Access System CP CONFIGURATION From the CP Configuration page, you can view summary information about captive portals on the system, add a captive portal, and configure existing captive portals. Use the CP Summary page to create or delete captive portal configurations. The switch supports 10 CP configurations. CP configuration 1 is created by default and can not be deleted. Each captive portal configuration can have unique guest or group access modes and a customized acceptance use policy that displays when the client connects. To view summary information about existing captive portals, or to add or delete a captive portal, click LAN > Security > Captive Portal > CP Configuration. Figure 251: Captive Portal Summary To create a CP configuration, enter the configuration name in the text box and click Add. After you add the configuration, the CP Configuration page for that configuration appears and a new tab with the name of that configuration is created. To delete an existing CP, select the check box for the CP to remove, and then click Delete. To configure the settings for an existing CP, click the name in the Configuration column or click the appropriate tab. In this document, the names captive portal or CP or portal are sometimes used in place of CP Configuration. Table 224 describes the fields on the CP Summary page. Field Configuration Mode Protocol Table 224: Captive Portal Summary Description Shows the captive portal ID and name. To access the configuration page for an exiting CP, click the configuration name. Shows whether the CP is enabled. Indicates whether the portal uses HTTP or HTTPS. Document 34CSFP6XXUWS-SWUM100-D7 Captive Portal Configuration Page 361