Dell PowerConnect 3548 Command Line Interface Guide - Page 107
bridge aging-time
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Syntax • bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-channel port- channel-number-list} • no bridge multicast forbidden forward-all • add - Forbids forwarding all Multicast packets. • remove - Does not forbid forwarding all Multicast packets. • interface-list - Separates non-consecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. • port-channel-number-list - Separates non-consecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of port-channels. Default Configuration This setting is disabled. Command Mode Interface Configuration (VLAN) mode. User Guidelines • IGMP snooping dynamically discovers Multicast router ports. When a Multicast router port is discovered, all the Multicast packets are forwarded to it unconditionally. • This command prevents a port from becoming a Multicast router port. Example The following example forbids forwarding all Multicast packets to 1/e1 with VLAN 2. Console(config)# interface vlan 2 Console(config-if)# bridge multicast forbidden forward-all add ethernet 1/e1 bridge aging-time The bridge aging-time Global Configuration mode command sets the Address Table aging time. Use the no form of this command to restore the default configuration. Syntax • bridge aging-time seconds • no bridge aging-time • seconds - Time in seconds. (Range: 10 - 630 seconds) Address Table Commands 107