Dell PowerConnect 3548 Command Line Interface Guide - Page 474
switchport general allowed vlan
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
Syntax • switchport trunk native vlan vlan-id • no switchport trunk native vlan • vlan-id - Specifies the ID of the native VLAN. Default Configuration VID=1. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines The command adds the port as a member in the VLAN. If the port is already a member in the VLAN (not as a native), it should be first removed from the VLAN. Example The following example configures VLAN number 123 as the native VLAN when Ethernet port 1/e16 is in trunk mode. Console(config)# interface ethernet 1/e16 Console(config-if)# switchport trunk native vlan 123 switchport general allowed vlan The switchport general allowed vlan Interface Configuration mode command adds or removes VLANs from a general port. Syntax • switchport general allowed vlan add vlan-list [tagged | untagged] • switchport general allowed vlan remove vlan-list • add vlan-list - Specifies the list of VLAN IDs to be added. Separate non-consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • remove vlan-list - Specifies the list of VLAN IDs to be removed. Separate non-consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • tagged - Indicates that the port transmits tagged packets for the VLANs. • untagged - Indicates that the port transmits untagged packets for the VLANs. 474 VLAN Commands