Dell PowerConnect 3548 Command Line Interface Guide - Page 417
traceroute, bytes from 10.1.1.1: icmp_seq=1. time=8 ms
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 417 highlights
Console> ping yahoo.com Pinging yahoo.com (66.218.71.198) with 64 bytes of data: 64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms 64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms 64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms 64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms ----10.1.1.1 PING Statistics---- 4 packets transmitted, 4 packets received, 0% packet loss round-trip (ms) min/avg/max = 7/8/11 traceroute The traceroute User EXEC mode command discovers routes that packets actually take when traveling to their destination. Syntax • traceroute ip-address |hostname [size packet_size] [ttl max-ttl] [count packet_count] [timeout time_out] [source ip-address] [tos tos] • traceroute ipv6 {ipv6-address | hostname} [size packet_size] [ttl max-ttl] [count packet_count] [timeout time_out] [source ip-address] [tos tos] • ipv6 - IPv6 checks the network connectivity. • ip4-address - Destination host IPv4 address. (Range: Valid IP Address) • ip6-address - Unicast or multicast IPv6 address to ping. When the IPv6 address is a Link Local address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage guidelines for the interface name syntax. • hostname - Host name of the destination host. (Range: 1 - 158 characters) • packet_size - Number of bytes in a packet. (Range: 40 - 1500) • max-ttl - The largest TTL value that can be used. The traceroute command terminates when the destination is reached or when this value is reached. (Range: 1 - 255) • packet_count - The number of probes to be sent at each TTL level. (Range: 1 - 10) • time_out - The number of seconds to wait for a response to a probe packet. (Range: 1 - 60) System Management 417