Dell PowerConnect 3548 Command Line Interface Guide - Page 245

Management ACL management access-list The management access-list Global Configuration mode command configures a management access list and enters the Management Access-list Configuration command mode. Use the no form of this command to delete an access list. Syntax • management access-list name • no management access-list name • name - Access list name. (Range: 1-32 characters) Default Configuration This command has no default configuration. Command Mode Global Configuration mode. User Guidelines • Use this command to configure a management access list. The command enters the Access-list Configuration mode, where permit and deny access rules are defined using the permit (Management) and deny (Management) commands. • If no match criteria are defined, the default is deny. • If you re-enter an access list context, the new rules are entered at the end of the access list. • Use the management access-class command to select the active access list. • The active management list cannot be updated or removed. • Management ACL requires a valid management interface, which is a port, VLAN, or port channel with an IP address or console interface. Management ACL only restricts access to the device for management configuration or viewing. Management ACL 245