Dell PowerConnect 3548 Command Line Interface Guide - Page 194
ip igmp snooping leave-time-out
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Syntax • ip igmp snooping mrouter-time-out time-out • no ip igmp snooping mrouter-time-out • time-out - Multicast router timeout in seconds (Range: 1 - 2147483647) Default Configuration The default value is 300 seconds. Command Mode Interface Configuration (VLAN) mode. User Guidelines There are no user guidelines for this command. Example The following example configures the Multicast router timeout to 200 seconds. Console(config)# interface vlan 2 Console(config-if)# ip igmp snooping mrouter-time-out 200 ip igmp snooping leave-time-out The ip igmp snooping leave-time-out Interface Configuration (VLAN) mode command configures the leave-time-out. If an IGMP report for a Multicast group was not received for a leave-time-out period after an IGMP Leave was received from a specific port, this port is deleted from the member list of that Multicast group. Use the no form of this command to return to the default configuration. Syntax • ip igmp snooping leave-time-out {time-out | immediate-leave} • no ip igmp snooping leave-time-out • time-out - Specifies the leave-time-out in seconds for IGMP queries. (Range: 0 - 2147483647) • immediate-leave - Indicates that the port should be immediately removed from the members list after receiving IGMP Leave. Default Configuration The default leave-time-out configuration is 10 seconds. 194 IGMP Snooping Commands