Dell PowerConnect 3548 Command Line Interface Guide - Page 142

backup-config unit://member/ backup-config logging Represents the backup configuration file. Backup configuration file on one of the units. Copy from a syslog file. Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode. User Guidelines • The location of a file system dictates the format of the source or destination URL. • The entire copying process may take several minutes and differs from protocol to protocol and from network to network. Understanding Invalid Combinations of Source and Destination Some invalid combinations of source and destination exist. Specifically, the following cannot be copied: • If the source file and destination file are the same file. • xmodem cannot be a destination. Can only be copied to image, boot and null. • tftp cannot be the source and destination on the same copy. • *.prv files can't be copied. • Copy to or from the slave units is for image and boot files only. The following table describes copy characters: Character ! . Description For network transfers, indicates that the copy process is taking place. Each exclamation point indicates successful transfer of ten packets (512 bytes each). For network transfers, indicates that the copy process timed out. Generally, many periods in a row means that the copy process may fail. Copying image file from a Server to Flash Memory Use the copy source-url image command to copy an image file from a server to Flash memory. Copying boot file from a Server to Flash Memory Use the copy source-url boot command to copy a boot file from a server to Flash memory. Copying a Configuration File from a Server to the Running Configuration 142 Configuration and Image Files