Dell PowerConnect 3548 Command Line Interface Guide - Page 112
show bridge address-table, Consoleconfig
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
User Guidelines • The command enables adding secure MAC addresses to a routed port in port security mode. • The command is available when the port is a routed port and in port security mode. The address is deleted if the port exits the security mode or is not a routed port. Example The following example adds the MAC-layer address 66:66:66:66:66:66 to port 1/e1. Console(config)# interface ethernet 1/e1 Console(config-if)# port security routed secure-address 66:66:66:66:66:66 show bridge address-table The show bridge address-table Privileged EXEC mode command displays all entries in the bridgeforwarding database. Syntax • show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number] • vlan - Specifies a valid VLAN, such as VLAN 1. • interface - A valid Ethernet port. • port-channel-number - A valid port-channel number. Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode. User Guidelines • Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3 interface) are presented in the VLAN column by a port number and not by a VLAN ID. • Special MAC addresses that were not statically defined or dynamically learned are displayed in the MAC Address Table. This includes, for example, MAC addresses defined in ACLs. 112 Address Table Commands