Dell PowerConnect 3548 Command Line Interface Guide - Page 85

User Guidelines There are no user guidelines for this command. Example The following example specifies the default authentication method when accessing a higher privilege level from a console. Console(config)# line console Console(config-line)# enable authentication default ip http authentication The ip http authentication Global Configuration mode command specifies authentication methods for HTTP server users. Use the no form of this command to return to the default configuration. Syntax • ip http authentication method1 [method2...] • no ip http authentication • method1 [method2...] - Specify at least one from the following table: Keyword local none radius tacacs Description Uses the local username database for authentication. Uses no authentication. Uses the list of all RADIUS servers for authentication. Uses the list of all TACACS+ servers for authentication. Default Configuration The local user database is checked. This has the same effect as the command ip http authentication local. Command Mode Global Configuration mode. User Guidelines • The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. AAA Commands 85