Dell PowerConnect 3548 Command Line Interface Guide - Page 521
dot1x max-req
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 521 highlights
Command Mode Interface Configuration (Ethernet) mode. User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients. and authentication servers Examples The following command sets the number of seconds that the device waits for a response to an EAPrequest/identity frame, to 3600 seconds. Console(config)# interface ethernet 1/e16 Console(config-if)# dot1x timeout tx-period 3600 dot1x max-req The dot1x max-req Interface Configuration mode command sets the maximum number of times that the device sends an Extensible Authentication Protocol (EAP)-request/identity frame (assuming that no response is received) to the client, before restarting the authentication process. Use the no form of this command to return to the default configuration. Syntax • dot1x max-req count • no dot1x max-req • count - Number of times that the device sends an EAP-request/identity frame before restarting the authentication process. (Range: 1 - 10) Default Configuration The default number of times is 2. Command Mode Interface Configuration (Ethernet) mode. User Guidelines • The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients. and authentication servers 802.1x Commands 521