Dell PowerConnect 3548 Command Line Interface Guide - Page 184

Syntax • gvrp enable • no gvrp enable Default Configuration GVRP is disabled on all interfaces. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines • An access port does not dynamically join a VLAN because it is always a member in only one VLAN. • Membership in an untagged VLAN is propagated in the same way as in a tagged VLAN. That is, the PVID is manually defined as the untagged VLAN VID. Example The following example enables GVRP on Ethernet port 1/e6. Console(config)# interface ethernet 1/e6 Console(config-if)# gvrp enable garp timer The garp timer Interface Configuration (Ethernet, Port channel) mode command adjusts the values of the join, leave and leaveall timers of GARP applications. Use the no form of this command to return to the default configuration. Syntax • garp timer {join | leave | leaveall} timer_value • no garp timer • {join | leave | leaveall} - Indicates the type of timer. • timer_value - Timer values in milliseconds in multiples of 10. (Range: 10 - 2147483647) Default Configuration Following are the default timer values: • Join timer - 200 milliseconds • Leave timer - 600 milliseconds • Leavall timer - 10000 milliseconds 184 GVRP Commands