Dell PowerConnect 3548 Command Line Interface Guide - Page 476
switchport general ingress-filtering disable, switchport general acceptable-frame-type tagged-only
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 476 highlights
Example The following example configures the PVID for Ethernet port 1/e16, when the interface is in general mode. Console(config)# interface ethernet 1/e16 Console(config-if)# switchport general pvid 234 switchport general ingress-filtering disable The switchport general ingress-filtering disable Interface Configuration mode command disables port ingress filtering. Use the no form of this command to return to the default configuration. Syntax • switchport general ingress-filtering disable • no switchport general ingress-filtering disable Default Configuration Ingress filtering is enabled. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines There are no user guidelines for this command. Example The following example disables port ingress filtering on Ethernet port 1/e16. Console(config)# interface ethernet 1/e16 Console(config-if)# switchport general ingress-filtering disable switchport general acceptable-frame-type tagged-only The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards untagged frames at ingress. Use the no form of this command to return to the default configuration. Syntax • switchport general acceptable-frame-type tagged-only • no switchport general acceptable-frame-type tagged-only 476 VLAN Commands