Dell PowerConnect 3548 Command Line Interface Guide - Page 255
lldp tx-delay, lldp optional-tlv
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
lldp tx-delay The lldp tx-delay Global Configuration mode command specifies the delay between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Use the no form of this command to revert to the default setting. Syntax • lldp tx-delay seconds • no lldp tx-delay Parameters • seconds - Specifies the delay in seconds between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Range 1-8192 second. Default Configuration The default value is 2 seconds Command Modes Global Configuration mode. Usage Guidelines • It is recommended that the TxDelay be less than 0.25 of the LLDP timer interval. Examples The following example specifies the delay between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. Console (config) # lldp tx-delay 7 lldp optional-tlv To specify which optional TLVs from the basic set should be transmitted, use the lldp optional-tlv command in interface configuration mode. Use the no form of this command to revert to the default setting. Syntax lldp optional-tlv tlv1 [tlv2 ... tlv5] no lldp optional-tlv • tlv - Specifies TLV that should be included. Available optional TLVs are: port-desc, sys-name, sys-desc, sys-cap, 802.3-mac-phy. LLDP Commands 255