Dell PowerConnect 3548 Command Line Interface Guide - Page 72
LC (Line Configuration) Mode, MA (Management Access-level) Mode, MC (MST Configuration) Mode
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
switchport trunk allowed vlan switchport trunk native vlan traffic-shape Adds or removes VLANs from a port in general mode. Defines the port as a member of the specified VLAN, and the VLAN ID is the "port default VLAN ID (PVID)". Sets the shaper on an egress port. LC (Line Configuration) Mode Command Group autobaud enable authentication exec-timeout history history size login authentication password password-aging speed Description Configures the line for automatic baud rate detection (autobaud) Specifies the authentication method list when accessing a higher privilege level from a remote telnet or console. Configures the interval that the system waits until user input is detected. Enables the command history function. Configures the command history buffer size for a particular line. Specifies the login authentication method list for a remote telnet or console. Specifies a password on a line. Sets the expiration time of line passwords in the local database. Configures the baud rate of the line. MA (Management Access-level) Mode Command Group deny (Management) permit (Management) Description Defines a deny rule. Defines a permit rule. MC (MST Configuration) Mode Command Group abort (mst) exit (mst) Description Exits the MST region configuration mode without applying configuration changes. Exits the MST region configuration mode and applies all configuration changes. 72 Command Modes