Dell PowerConnect 3548 Command Line Interface Guide - Page 497
voice vlan secure, VLAN. Use
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 497 highlights
User Guidelines The port is added to the voice VLAN if a packet with a telephony MAC address source MAC address (defined by the voice vlan oui-table global configuration command) is trapped on the port. NOTE: The VLAN ID of the packet can be the voice VLAN ID or any other VLAN. The port joins the voice VLAN as a tagged port. If the time since the last telephony MAC addressed MAC address ages out exceeds the timeout limit (configured by the voice vlan aging-timeout global configuration command), the port is removed from the voice VLAN. Example The following example enables automatic voice VLAN configuration for a port console(config-if)# voice vlan enable voice vlan secure The voice vlan secure Interface Configuration mode command configures the secure mode for the voice VLAN. Use the no form of this command to disable the secure mode. Syntax • voice vlan secure • no voice vlan secure Default Configuration Not secured. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines • Use this command to specify that packets classified to the voice VLAN with a non- telephony MAC address source MAC address (defined by the voice vlan oui-table global configuration command) are discarded. • This command is relevant only to ports added to the voice VLAN automatically. Example The following example configures the current port in security mode. See User Guidlines. console(config-if)# voice vlan secure Voice VLAN 497