Dell PowerConnect 3548 Command Line Interface Guide - Page 522

Examples The following example sets the number of times that the device sends an EAP-request/identity frame to 6 . Console(config)# interface ethernet 1/e16 Console(config-if)# dot1x max-req 6 dot1x timeout supp-timeout The dot1x timeout supp-timeout Interface Configuration mode command sets the time for the retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. Use the no form of this command to return to the default configuration. Syntax • dot1x timeout supp-timeout seconds • no dot1x timeout supp-timeout • seconds - Time in seconds that the device waits for a response to an EAP-request frame from the client before resending the request. (Range: 1- 65535 seconds) Default Configuration Default timeout period is 30 seconds. Command Mode Interface configuration (Ethernet) mode. User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients. and authentication servers Examples The following example sets the timeout period before retransmitting an EAP-request frame to the client to 3600 seconds. Console(config-if)# dot1x timeout supp-timeout 3600 dot1x timeout server-timeout The dot1x timeout server-timeout Interface Configuration mode command sets the time that the device waits for a response from the authentication server. Use the no form of this command to return to the default configuration. 522 802.1x Commands