Dell PowerConnect 3548 Command Line Interface Guide - Page 520
dot1x timeout tx-period
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 520 highlights
• seconds - Specifies the time in seconds that the device remains in the quiet state following a failed authentication exchange with the client. (Range: 0 - 65535 seconds) Default Configuration Quiet period is 60 seconds. Command Mode Interface Configuration (Ethernet) mode. User Guidelines • During the quiet period, the device does not accept or initiate authentication requests. • The default value of this command should only be changed to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. • To provide a faster response time to the user, a smaller number than the default value should be entered. Examples The following example sets the number of seconds that the device remains in the quiet state following a failed authentication exchange to 3600. Console(config)# interface ethernet 1/e16 Console(config-if)# dot1x timeout quiet-period 3600 dot1x timeout tx-period The dot1x timeout tx-period Interface Configuration mode command sets the number of seconds that the device waits for a response to an Extensible Authentication Protocol (EAP)-request/identity frame from the client before resending the request. Use the no form of this command to return to the default configuration. Syntax • dot1x timeout tx-period seconds • no dot1x timeout tx-period • seconds - Specifies the time in seconds that the device waits for a response to an EAPrequest/identity frame from the client before resending the request. (Range: 30 - 65535 seconds) Default Configuration Timeout period is 30 seconds. 520 802.1x Commands