Dell PowerConnect 3548 Command Line Interface Guide - Page 239

User Guidelines • This command is available only on the line console. • To start communication using Autobaud, press twice. This configuration applies only to the current session. Examples The following example enables autobaud. Console(config)# line console Console(config-line)# autobaud exec-timeout The exec-timeout Line Configuration mode command sets the interval that the system waits until user input is detected. Use the no form of this command to return to the default configuration. Syntax • exec-timeout minutes [seconds] • no exec-timeout • minutes - Specifies the number of minutes. (Range: 0 - 65535) • seconds - Specifies additional time intervals in seconds. (Range: 0 - 59) Default Configuration The default configuration is 10 minutes. Command Mode Line Configuration mode. User Guidelines • To specify no timeout, enter the exec-timeout 0 command. Examples The following example configures the interval that the system waits until user input is detected to 20 minutes. Console(config)# line console Console(config-line)# exec-timeout 20 Line Commands 239