Dell PowerConnect 3548 Command Line Interface Guide - Page 193

Example The following example enables automatic learning of Multicast router ports on VLAN 2. Console(config) # interface vlan 2 Console(config-if)# ip igmp snooping mrouter learn-pim-dvmrp ip igmp snooping host-time-out The ip igmp snooping host-time-out Interface Configuration (VLAN) mode command configures the host-time-out. If an IGMP report for a Multicast group was not received for a host-time-out period from a specific port, this port is deleted from the member list of that Multicast group. Use the no form of this command to return to the default configuration. Syntax • ip igmp snooping host-time-out time-out • no ip igmp snooping host-time-out • time-out - Host timeout in seconds. (Range: 1 - 2147483647) Default Configuration The default host-time-out is 260 seconds. Command Mode Interface Configuration (VLAN) mode. User Guidelines The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router. Example The following example configures the host timeout to 300 seconds. Console(config)# interface vlan 2 Console(config-if)# ip igmp snooping host-time-out 300 ip igmp snooping mrouter-time-out The ip igmp snooping mrouter-time-out Interface Configuration (VLAN) mode command configures the mrouter-time-out. The ip igmp snooping mrouter-time-out Interface Configuration (VLAN) mode command is used for setting the aging-out time after Multicast router ports are automatically learned. Use the no form of this command to return to the default configuration. IGMP Snooping Commands 193