Dell PowerConnect 3548 Command Line Interface Guide - Page 36
Address Table Commands - configure
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
deny (MAC) service-acl show access-lists show interfaces accesslists Denies traffic if the conditions defined in the deny statement match Sets the default ace action to permit or deny. Applies an ACL to the input interface. Displays ACLs defined on the device. MAC Access-List Configuration Interface Configuration Privileged EXEC Privileged EXEC Address Table Commands Command Group bridge address bridge multicast filtering bridge multicast address bridge multicast forbidden address bridge multicast unregistered bridge multicast forwardall bridge multicast forbidden forward-all bridge aging-time clear bridge port security port security mode port security max Description Adds a static MAC-layer station source address to the bridge table. Enables filtering of Multicast addresses. Registers MAC-layer Multicast addresses to the bridge table, and adds static ports to the group. Forbids adding a specific Multicast address to specific ports. Configures the forwarding state of unregistered multicast addresses. Enables forwarding all Multicast frames on a port. Forbids a port from becoming a forward-all Multicast port. Sets the Address Table aging time. Removes any learned entries from the forwarding database. Disables new address learning/forwarding on an interface. Configures the port security learning mode. Configures the maximum number of addresses that may be learned on the port while the port is in port security mode. Access Mode Interface (VLAN) Configuration Global Configuration Interface (VLAN) Configuration Interface (VLAN) Configuration Interface Configuration Interface (VLAN) Configuration Interface (VLAN) Configuration Global Configuration Privileged EXEC Interface Configuration Interface Configuration Interface Configuration 36 Command Groups