Dell PowerConnect 3548 Command Line Interface Guide - Page 92
of the following values
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Syntax • permit {any| protocol} {any|{source source-wildcard}} {any|{destination destination-wildcard}} [dscp number | ip-precedence number] • permit-icmp {any|{source source-wildcard}} {any|{destination destination-wildcard}} {any|icmptype} {any|icmp-code} [dscp number | ip-precedence number] • permit-igmp {any|{source source-wildcard}} {any|{destination destination-wildcard}} {any|igmptype} [dscp number | ip-precedence number] • permit-tcp {any|{ source source-wildcard}} {any|source-port} {any|{ destination destinationwildcard}} {any|destination-port} [dscp number | ip-precedence number] [flags list-of-flags] [srcport-wildcard source-port-wildcard] [dst-port-wildcard source-port-wildcard] • permit-udp {any|{ source source-wildcard}} {any| source-port} {any|{destination destinationwildcard}} {any|destination-port} [dscp number | ip-precedence number] [src-port-wildcard sourceport-wildcard] [dst-port-wildcard ] • source - Specifies the source IP address of the packet. • source-wildcard - Specifies wildcard bits to be applied to the sources IP address by placing 1s in bit positions to be ignored. • destination - Specifies the destination IP address of the packet. • destination- wildcard - Specifies wildcard bits to be applied to the destination IP address by placing 1s in bit positions to be ignored. • protocol - Specifies the name or the number of an IP protocol. Available protocol names: icmp, igmp, ip, tcp, egp, igp, udp, hmp, rdp, idpr, idrp, rsvp, gre, esp, ah, eigrp, ospf, ipip, pim, l2tp, isis. (Range: 0 - 255) • dscp number - Specifies the DSCP value. • ip-precedence number - Specifies the IP precedence value. • icmp-type - Specifies an ICMP message type for filtering ICMP packets. Enter a number or one of the following values: echo-reply, destination-unreachable, source-quench, redirect, alternatehost-address, echo-request, router-advertisement, router-solicitation, time-exceeded, parameterproblem, timestamp, timestamp-reply, information-request, information-reply, address-maskrequest, address-mask-reply, traceroute, datagram-conversion-error, mobile-host-redirect, mobileregistration-request, mobile-registration-reply, domain-name-request, domain-name-reply, skip, photuris. (Range: 0 - 255) • icmp-code - Specifies an ICMP message code for filtering ICMP packets. (Range: 0 - 255) • igmp-type - Specifies IGMP packets filtered by IGMP message type. Enter a number or one of the following values: host-query, host-report, dvmrp, pim, cisco-trace, host-report-v2, host-leave-v2, host-report-v3. (Range: 0 - 255) • destination-port - Specifies the UDP/TCP destination port. (Range: 1 - 65535) • destination-port-wildcard - Specifies wildcard bits to be applied to the destination port by placing 1s in bit positions to be ignored. 92 ACL Commands