Dell PowerConnect 3548 Command Line Interface Guide - Page 259

lldp med network-policy (interface) The lldp med network-policy Interface Configuration (Ethernet) mode command attaches a LLDP MED network policy to a port. Use the no form of this command to remove an LLDP MED network policy from a port. Syntax • lldp med network-policy {add / remove}number • no lldp med network-policy number • number - Network policy sequential number. • add - Specifies attach to a port. • remove - Specifies remove from a porty. Default Configuration No network policy is attached. Command Mode Interface Configuration (Ethernet) mode. User Guidelines There are no guidelines for this command. Example The following example attaches a LLDP MED network policy to a port. Console(config)# interface ethernet 1/e1 Console(config-if)# lldp med enable lldp med location The lldp med location Interface Configuration mode command configures location information for the Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) for an interface. Use the no form of this command to delete location information for an interface. Syntax • lldp med location coordinate data • no lldp med location coordinate • lldp med location civic-address data • no lldp med location civic-address LLDP Commands 259