Dell PowerConnect 3548 Command Line Interface Guide - Page 327

• type - Specifies the method used for sampling the selected variable and calculating the value to be compared against the thresholds. Possible values are absolute and delta. If the method is absolute, the value of the selected variable is compared directly with the thresholds at the end of the sampling interval. If the method is delta, the selected variable value of the last sample is subtracted from the current value, and the difference is compared with the thresholds. • direction - Specifies the alarm that may be sent when this entry is first set to valid. Possible values are rising, rising-falling and falling. If the first sample (after this entry becomes valid) is greater than or equal to rthreshold and direction is equal to rising or rising-falling, a single rising alarm is generated. If the first sample (after this entry becomes valid) is less than or equal to fthreshold and direction is equal to falling or rising-falling, a single falling alarm is generated. • name - Specifies the name of the person who configured this alarm. If unspecified, the name is an empty string. Default Configuration • The type is absolute. • The startup direction is rising-falling. Command Mode Global Configuration mode. User Guidelines There are no user guidelines for this command. Example The following example configures the following alarm conditions: • Alarm index - 1000 • Variable identifier - dell • Sample interval - 360000 seconds • Rising threshold - 1000000 • Falling threshold - 1000000 • Rising threshold event index - 10 • Falling threshold event index - 20 Console(config)# rmon alarm 1000 dell 360000 1000000 1000000 10 20 RMON Commands 327