Dell PowerConnect 3548 Command Line Interface Guide - Page 94
Specifies IGMP packets filtered by IGMP message type. Enter a number or one
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
• deny-tcp [disable-port] {any|{ source source-wildcard}} {any|source-port} {any|{destination destination-wildcard}} {any|destination-port} [dscp number | ip-precedence number] [flags list-offlags] [src-port-wildcard source-port-wildcard] [dst-port-wildcard source-port-wildcard] • deny-udp [disable-port] {any|{ source source-wildcard}} {any| source-port} {any|{destination destination-wildcard}} {any|destination-port} [dscp number | ip-precedence number] [src-portwildcard source-port-wildcard] [dst-port-wildcard source-port-wildcard] • disable-port - Specifies that the Ethernet interface is disabled if the condition is matched. • source - Specifies the Source IP address of the packet. • source-wildcard - Specifies wildcard bits to be applied to the source IP address by placing 1s in bit positions to be ignored. • destination - Specifies the destination IP address of the packet. • destination- wildcard - Specifies wildcard bits to be applied to the destination IP address by placing 1s in bit positions to be ignored. • protocol - Specifies the name or the number of an IP protocol. Available protocol names: icmp, igmp, ip, tcp, egp, igp, udp, hmp, rdp, idpr, idrp, rsvp, gre, esp, ah, eigrp, ospf, ipip, pim, l2tp, isis. (Range: 0 - 255) • dscp number - Specifies the DSCP value. • ip-precedence number - Specifies the IP precedence value. • icmp-type - Specifies an ICMP message type for filtering ICMP packets. Enter a number or one of the following values: echo-reply, destination-unreachable, source-quench, redirect, alternatehost-address, echo-request, router-advertisement, router-solicitation, time-exceeded, parameterproblem, timestamp, timestamp-reply, information-request, information-reply, address-maskrequest, address-mask-reply, traceroute, datagram-conversion-error, mobile-host-redirect, mobileregistration-request, mobile-registration-reply, domain-name-request, domain-name-reply, skip, photuris. • icmp-code - Specifies an ICMP message code for filtering ICMP packets. (Range: 0 - 255) • igmp-type - Specifies IGMP packets filtered by IGMP message type. Enter a number or one of the following values: host-query, host-report, dvmrp, pim, cisco-trace, host-report-v2, host-leavev2, host-report-v3. (Range: 0 - 255) • destination-port - Specifies the UDP/TCP destination port. (Range: 1 - 65535) • destination-port-wildcard - Specifies wildcard bits to be applied to the destination port by placing 1s in bit positions to be ignored. • source-port - Specifies the UDP/TCP source port. (Range: 1 - 65535) • source-port-wildcard - Specifies wildcard bits to be applied to the source port by placing 1s in bit positions to be ignored. • flags list-of-flags - Specifies the list of TCP flags. If a flag should be set it is prefixed by "+". If a flag is not set, it is prefixed by "-". Available options are +urg, +ack, +psh, +rst, +syn, +fin, -urg, -ack, -psh, -rst, -syn and -fin. The flags are concatenated to a one string. For example: +fin-ack. 94 ACL Commands