Dell PowerConnect 3548 Command Line Interface Guide - Page 249

management access-class The management access-class Global Configuration mode command restricts management connections by defining the active management access list. Use the no form of this command to disable this restriction. Syntax • management access-class {console-only | name} • no management access-class • name - Specifies the name of the access list to be used. (Range: 1-32 characters) • console-only - Indicates that the device can be managed only from the console. Default Configuration If no access list is specified, an empty access list is used. Command Mode Global Configuration mode. User Guidelines There are no user guidelines for this command. Example The following example configures an access list called mlist as the management access list. Console(config)# management access-class mlist show management access-list The show management access-list Privileged EXEC mode command displays management access-lists. Syntax • show management access-list [name] • name - Specifies the name of a management access list. (Range: 1 - 32 characters) Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode. Management ACL 249