Dell PowerConnect 3548 Command Line Interface Guide - Page 340
snmp-server user, Consoleconfig, user-group, user-view
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
Examples The following example attaches a group called user-group to SNMPv3 and assigns to the group the privacy security level and read access rights to a view called user-view. Console(config)# snmp-server group user-group v3 priv read user-view snmp-server user The snmp-server user Global Configuration mode command configures a new SNMP Version 3 user. Use the no form of this command to remove a user. Syntax • snmp-server user username groupname [remote engineid-string] [ auth-md5 password | auth-sha password | auth-md5-key md5-des-keys | auth-sha-key sha-des-keys ] • no snmp-server user username [remote engineid-string] • username - Specifies the name of the user on the host that connects to the agent. (Range: 1 - 30 characters) • groupname - Specifies the name of the group to which the user belongs. (Range: 1 - 30 characters) • engineid-string - Specifies the engine ID of the remote SNMP entity to which the user belongs. The engine ID is a concatenated hexadecimal string. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. (Range: 5 - 32 characters) • auth-md5 password - Indicates the HMAC-MD5-96 authentication level. The user should enter a password for authentication and generation of a DES key for privacy. (Range: 1 - 32 characters) • auth-sha password - Indicates the HMAC-SHA-96 authentication level. The user should enter a password for authentication and generation of a DES key for privacy. (Range: 1 - 32 characters) • auth-md5-key md5-des-keys - Indicates the HMAC-MD5-96 authentication level. The user should enter a concatenated hexadecimal string of the MD5 key (MSB) and the privacy key (LSB). If authentication is only required, 16 bytes should be entered; if authentication and privacy are required, 32 bytes should be entered. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. (16 or 32 bytes) • auth-sha-key sha-des-keys - Indicates the HMAC-SHA-96 authentication level. The user should enter a concatenated hexadecimal string of the SHA key (MSB) and the privacy key (LSB). If authentication is only required, 20 bytes should be entered; if authentication and privacy are required, 36 bytes should be entered. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. (20 or 36 bytes) 340 SNMP Commands