Dell PowerConnect 3548 Command Line Interface Guide - Page 185
gvrp vlan-creation-forbid
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Command Mode Interface configuration (Ethernet, port-channel) mode. User Guidelines • The following relationship must be maintained between the timers: - Leave time must be greater than or equal to three times the join time. - Leave-all time must be greater than the leave time. • Set the same GARP timer values on all Layer 2-connected devices. If the GARP timers are set differently on Layer 2-connected devices, the GARP application will not operate successfully. Example The following example sets the leave timer for Ethernet port 1/e6 to 900 milliseconds. Console(config)# interface ethernet 1/e6 Console(config-if)# garp timer leave 900 gvrp vlan-creation-forbid The gvrp vlan-creation-forbid Interface Configuration (Ethernet, port-channel) mode command disables dynamic VLAN creation or modification. Use the no form of this command to enable dynamic VLAN creation or modification. Syntax • gvrp vlan-creation-forbid • no gvrp vlan-creation-forbid Default Configuration Dynamic VLAN creation or modification is enabled. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines • This command forbids dynamic VLAN creation from the interface. The creation or modification of dynamic VLAN registration entries as a result of the GVRP exchanges on an interface are restricted only to those VLANs for which static VLAN registration exists. GVRP Commands 185