Dell PowerConnect 3548 Command Line Interface Guide - Page 502

Default Configuration The default port number is 80. Command Mode Global Configuration mode. User Guidelines Specifying 0 as the port number effectively disables HTTP access to the device. Example The following example configures the http port number to 100. Console(config)# ip http port 100 ip http exec-timeout The ip http exec-timeout global configuration command sets the interval the system waits for user input before automatically logging off. Use the no form of this command to return to default. Syntax • ip http exec-timeout minutes [seconds] • no ip http exec-timeout Parameters • minutes - Integer that specifies the number of minutes. (Range: 0 - 65535) • seconds - Additional time intervals in seconds. (Range: 0 - 59) Default Configuration The default configuration is 10 minutes. Command Mode Global Configuration mode. User Guidelines • This command also configures the exec-timeout for HTTPS in case the HTTPS timeout was not set. To specify no timeout, enter the command ip https exec-timeout 0 0. 502 Web Server