Dell PowerConnect 3548 Command Line Interface Guide - Page 336
snmp-server view, snmp-server community
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
User Guidelines • The view-name parameter cannot be specified for su, which has access to the whole MIB. • The view-name parameter can be used to restrict the access rights of a community string. When it is specified: - An internal security name is generated. - The internal security name for SNMPv1 and SNMPv2 security models is mapped to an internal group name. - The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view-name (read-view and notify-view always, and for rw for write-view also) • The group-name parameter can also be used to restrict the access rights of a community string. When it is specified: - An internal security name is generated. - The internal security name for SNMPv1 and SNMPv2 security models is mapped to the group name. • The no snmp-server community command is used to remove a community or a community group. Examples The following example defines community access string public to permit administrative access to SNMP protocol at an administrative station with IP address 192.168.1.20. Console(config)# snmp-server community public su 192.168.1.20 snmp-server view The snmp-server view Global Configuration mode command creates or updates a Simple Network Management Protocol (SNMP) server view entry. Use the no form of this command to remove a specified SNMP server view entry. 336 SNMP Commands