Dell PowerConnect 3548 Command Line Interface Guide - Page 504

Default Configuration The default port number is 443. Command Mode Global Configuration mode. User Guidelines Specifying 0 as the port number effectively disables HTTPS access to the device. Example The following example configures the https port number to 100. Console(config)# ip https port 100 ip https exec-timeout The ip https exec-timeout Global Configuration command sets the interval the system waits for user input before automatically logging off. Use the no form of this command to return to default. Syntax • ip https exec-timeout minutes [seconds] • no ip https exec-timeout Parameters • minutes - Integer that specifies the number of minutes. (Range: 0 - 65535) • seconds - Additional time intervals in seconds. (Range: 0 - 59) Default Configuration The default configuration is the exec-timeout that was set by the ip http exec-timeout command. Command Mode Global Configuration mode. User Guidelines This command also configures the exec-timeout for HTTPS in case the HTTPS timeout was not set. To specify no timeout, enter the command ip https exec-timeout 0 0. 504 Web Server