Dell PowerConnect 3548 Command Line Interface Guide - Page 402
Up to 8 syslog servers can be used., The default facility is local7.
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
Syntax • logging {ip4-address | ip6-address |hostname} [port port] [severity level] [facility facility] [description text] • no logging {ip4-address | ip6-address | hostname} • ip4-address - Host IPv4 address to be used as a syslog server. • ip6-address - Host IPv6 address to be used as a syslog server. When the IPv6 address is a Link Local address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage guidelines for the interface name syntax. • hostname - Specifies the host name of the syslog server. (Range: 1 - 158 characters) • port - Specifies the port number for syslog messages. (Range: 1 - 65535) • level - Specifies the severity level of logged messages sent to the syslog servers. Possible values: emergencies, alerts, critical, errors, warnings, notifications, informational and debugging. • facility - Specifies the facility that is indicated in the message. Possible values: local0, local1, local2, local3, local4, local5, local 6, local7. • text - Syslog server description. (Range: 1-64 characters) Default Configuration • The default port number is 514. • The default logging message level is informational. • The default facility is local7. Command Mode Global Configuration mode. User Guidelines • Up to 8 syslog servers can be used. • If no specific severity level is specified, the global values apply to each server. • The IPv6Z address format: % - interface-name - vlan | ch | isatap | | 0 - integer - | - decimal-number - 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 - physical-port-name - Designated port number, for example 1/e16. If the egress interface is not specified, the default interface is selected. Specifying interface zone=0 is the same as not defining an egress interface. 402 Syslog Commands