Dell PowerConnect 3548 Command Line Interface Guide - Page 84

Syntax • login authentication {default | list-name} • no login authentication • default - Uses the default list created with the aaa authentication login command. • list-name - Uses the indicated list created with the aaa authentication login command. Default Configuration Uses the default set with the command aaa authentication login. Command Mode Line Configuration mode. User Guidelines • Changing login authentication from default to another value may disconnect the telnet session. Example The following example specifies the default authentication method for a console. Console(config)# line console Console(config-line)# login authentication default enable authentication The enable authentication Line Configuration mode command specifies the authentication method list when accessing a higher privilege level from a remote telnet or console. Use the no form of this command to return to the default configuration specified by the aaa authentication enable command. Syntax • enable authentication {default | list-name} • no enable authentication • default - Uses the default list created with the aaa authentication enable command. • list-name - Uses the indicated list created with the aaa authentication enable command. Default Configuration Uses the default set with the aaa authentication enable command. Command Mode Line Configuration mode. 84 AAA Commands