Dell PowerConnect 3548 Command Line Interface Guide - Page 482
ip internal-usage-vlan, Console, Consoleconfig
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 482 highlights
ip internal-usage-vlan The ip internal-usage-vlan Interface Configuration mode command reserves a VLAN as the internal usage VLAN of an interface. Use the no form of this command to return to the default configuration. Syntax • ip internal-usage-vlan vlan-id • no ip internal-usage-vlan • vlan-id - Specifies the ID of the internal usage VLAN. Default Configuration The software reserves an unused VLAN as the internal usage VLAN of an interface. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines • An internal usage VLAN is required when an IP interface is configured on an Ethernet port or port- channel. • This command enables the user to configure the internal usage VLAN of a port. If an internal usage VLAN is not configured and the user configures an IP interface, an unused VLAN is selected by the software. • If the software selected a VLAN for internal use and the user uses that VLAN as a static or dynamic VLAN, the user should do one of the following: - Remove the IP interface. - Create the VLAN and recreate the IP interface. - Use this command to explicitly configure a different VLAN as the internal usage VLAN. • This command is not supported under the command interface range ethernet. Example The following example reserves VLAN 15 as the internal usage VLAN of ethernet port 1/e8. Console# config Console(config)# interface ethernet 1/e8 Console(config-if)# ip internal-usage-vlan 15 482 VLAN Commands