Dell PowerConnect 3548 Command Line Interface Guide - Page 454
tunnel isatap router, Console config, Console config-tunnel
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 454 highlights
Syntax • tunnel mode ipv6ip {isatap} • no tunnel mode ipv6ip • isatap - Automatic IPv6 over IPv4 ISATAP tunnel is enabled. Default Configuration Disabled. Command Mode Interface Tunnel Configuration mode. User Guidelines The system can be enabled to an ISATAP tunnel. When enabled, an automatic tunnel interface is created on each interface that is assigned with IPv4 address NOTE: On a specific interface (that is port/ VLAN), both native IPV6 and transition mechanisms can coexist. The host implementation selects the egress interface according to the scope of the destination IP address (for example ISATAP/ Native IPv6) Example The following example configures an IPv6 transition mechanism global support mode. Console (config)# interface tunnel 1 Console (config-tunnel)# tunnel mode ipv6ip tunnel isatap router The tunnel isatap router Interface Tunnel Configuration mode command configures a global string that represents a specific automatic tunnel router domain name. Use the no form of this command to remove the string associated with the router domain name and return to the default. Syntax • tunnel isatap router router_name • no tunnel isatap router • router_name - A string representing the router's domain name. Default Configuration By default, 'ISATAP' string represents the corresponding automatic tunnel router's domain name. 454 Tunnel