Dell PowerConnect 3548 Command Line Interface Guide - Page 345
filtered. Range: 1 - 30 characters, informs. If unspecified, the default timeout period is 15 seconds.
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
Syntax • snmp-server host {ip4-address | ip6-address | hostname} community-string [traps | informs] [1 | 2] [udp-port port] [filter filtername] [timeout seconds] [retries retries] • no snmp-server host {ip4-address | ip6-address | hostname} [traps | informs] • ip4-address - The host IPv4 address (the targeted recipient). • ip6-address - The host IPv6 address (the targeted recipient). When the IPv6 address is a Link Local address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage guidelines for the interface name syntax. • hostname - Specifies the name of the host. (Range:1 - 158 characters) • community-string - Specifies a password-like community string sent with the notification operation. (Range: 1 - 20) • traps - Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to the host. • informs - Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1. • 1 - Indicates that SNMPv1 traps will be used. • 2 - Indicates that SNMPv2 traps will be used. If • port - Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162. (Range: 1 - 65535) • filtername - Specifies a string that defines the filter for this host. If unspecified, nothing is filtered. (Range: 1 - 30 characters) • seconds - Specifies the number of seconds to wait for an acknowledgment before resending informs. If unspecified, the default timeout period is 15 seconds. (Range: 1 - 300) • retries - Specifies the maximum number of times to resend an inform request. If unspecified, the default maximum number of retries is 3. (Range: 0 - 255) Default Configuration This command has no default configuration. Command Mode Global Configuration mode. User Guidelines • When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient is automatically generated for all the MIB. • When configuring an SNMPv1 notification recipient, the Inform option cannot be selected. SNMP Commands 345