Dell PowerConnect 3548 Command Line Interface Guide - Page 28
Interface Configuration Mode and Specific Configuration Modes, Interface Configuration modes - commands
View all Dell PowerConnect 3548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
To enter the Global Configuration mode, at the Privileged EXEC mode prompt enter the command configure and press . The Global Configuration mode prompt is displayed. The Global Configuration mode prompt consists of the device host name followed by (config) and #. Console(config)# To return from the Global Configuration mode to the Privileged EXEC mode, the user can use one of the following commands: • exit • end • Ctrl+Z The following example illustrates how to access the Global Configuration mode and return to the Privileged EXEC mode: Console# Console# configure Console(config)# exit Console# Interface Configuration Mode and Specific Configuration Modes Interface Configuration mode commands modify specific interface operations. The following are the Interface Configuration modes: • Line Interface - Contains commands to configure the management connections. These include commands such as line timeout settings, etc. The Line Commands Global Configuration mode is used to enter the Line Configuration command mode. • VLAN Database - Contains commands to create a VLAN as a whole. The vlan database Global Configuration mode command is used to enter the VLAN Database Interface Configuration mode. • Management Access List - Contains commands to define management access-lists. The management access-list Global Configuration mode command is used to enter the Management Access List Configuration mode. • Ethernet - Contains commands to manage port configuration. The interface ethernet Global Configuration mode command is used to enter the Interface Configuration mode to configure an Ethernet type interface. • Port Channel - Contains commands to configure port-channels, for example, assigning ports to a port-channel. Most of these commands are the same as the commands in the Ethernet interface mode, and are used to manage the member ports as a single entity. The interface port-channel Global Configuration mode command is used to enter the Port Channel Interface Configuration mode. 28 Using the CLI