Dell PowerVault MD3200 Owner's Manual - Page 102
Changing the I/O Type, Logical, Virtual Disk, Change, Segment Size
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
To change the segment size of a virtual disk: 1 In the AMW, select the Logical tab and select a virtual disk. 2 Select Virtual Disk Change Segment Size. 3 Select the required segment size. A message prompts you to confirm the selected segment size. 4 Click Yes. The segment size modification operation begins. The virtual disk icon in the Logical pane shows an Operation in Progress status while the operation is taking place. NOTE: To view the progress or change the priority of the modification operation, select a virtual disk in the disk group, and select Virtual Disk Change Modification Priority. Changing the I/O Type You can specify the virtual disk I/O characteristics for the virtual disks that you are defining as part of the storage array configuration. The expected I/O characteristics of the virtual disk is used by the system to indicate an applicable default virtual disk segment size and dynamic cache read prefetch setting. NOTE: The dynamic cache read prefetch setting can be changed later by selecting Virtual Disk Change Cache Settings. You can change the segment size later by selecting Virtual Disk Change Segment Size. The I/O characteristic types shown below are only presented during the create virtual disk process. When you choose one of the virtual disk I/O characteristics, the corresponding dynamic cache prefetch setting and segment size that are typically well suited for expected I/O patterns are populated in the Dynamic cache read prefetch field and the Segment size field. 102 Configuration: Disk Groups and Virtual Disks