Dell PowerVault MD3200 Owner's Manual - Page 191
Hard Drives, Removing a Drive Blank, SAFETY: Models AMT, E03J, and E04J
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Hard Drives SAFETY: Models AMT, E03J, and E04J Models AMT, E03J, and E04J are intended for installation only in restricted access locations as defined in cl 1.2.7.3 of IEC 60950-1:2005. Depending on your configuration, your array either supports up to 24 2.5-inch SAS hard drives or up to 12 3.5-inch SAS hard drives in internal drive bays. Hard drives are connected to a backplane through hard-drive carriers and can be configured as hot-swappable. Removing a Drive Blank CAUTION: To maintain proper system cooling, all empty hard-drive bays must have drive blanks installed. 1 If installed, remove the front bezel. See "Removing the Front Bezel" on page 190. 2 Press the release tab and slide the drive blank out until it is free of the drive bay. See Figure 15-2 for PowerVault MD3200 and Figure 15-3 for PowerVault MD3220. Figure 15-2. Removing and Installing a 3.5-Inch Hard-Drive Blank 1 2 1 drive blank 2 release tab Management: Installing Array Components 191