Garmin GTN 650 Pilot's Guide - Page 101
Selecting an Approach
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Touch To Select Or Remove Arrival Touch To Edit Waypoint Foreword Scroll To View Flight Plan With Departure Waypoints Getting Started Xpdr Ctrl Figure 6-14 Flight Plan With Arrival Loaded Com/Nav 6.4 Selecting an Approach Only one approach can be loaded at a time in a flight plan. If an approach FPL is loaded when another approach is already in the active flight plan, the new approach replaces the previous approach. The route is defined by selection of an Direct-To approach, the transition waypoint, and a runway. 1. Touch the PROC key on the Home page. The Approach, Proc Arrival, and Departure fields will be dashed until a selection Wpt Info is made. Map Touch To Select Approach Traffic Touch To Select Arrival Terrain Touch To Select Departure Weather Figure 6-15 Procedures Selection Window Nearest 2. Touch the Approach key on the Procedures page to select an approach for the destination airport. Confirm that the Music intended airport is shown or touch the Airport key and select the desired airport. Utilities Touch To Select Airport System Touch To Select Approach Messages Touch To Select Channel ID Symbols Figure 6-16 Selecting an Approach Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 6-7