Garmin GTN 650 Pilot's Guide - Page 128
Waypoint Location Based on Lat/Lon, Coordinates
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Foreword Getting Started Touch to Select the Desired Waypoint Reference Type Xpdr Ctrl Com/Nav FPL Direct-To Proc 7.7.1 Wpt Info Map Traffic Terrain Weather Figure 7-21 Waypoint Info - Create User Waypoint Type 6. If desired, touch the Temporary? key to create the waypoint for only temporary use. Temporary waypoints will be removed when the power is cycled. 7. When finished with all selections, touch the Create key to create the new waypoint. Waypoint Location Based on Lat/Lon Coordinates 1. From the Create User Waypoint page, touch the Position key and then the Lat/Lon key. Then, touch the Latitude/ Longitude value key. Touch to Select Lat/Lon Waypoint Reference Type Touch to Select Lat/Lon Values Nearest Music Utilities System Messages Figure 7-22 Waypoint Info - Create User Waypoint Type - Lat/Lon 2. The Lat/Lon coordinate values will be highlighted. Touch the Lat or Lon key to toggle selection of the hemisphere values and highlight the selected value. The Large knob may also be used for cursor movement and characters selected with the Small knob. Use the Large knob to backspace or move the cursor to the left. When The Lat Key Is Touched, The Latitude Hemisphere Value Is Active For Selection Symbols Appendix Touch to Select Hemisphere Value Touch To Toggle Lat/Lon Selection Touch to Select Lat/Lon Coordinates Index Figure 7-23 Waypoint Info - Set Lat/Lon Coordinates 7-16 Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B