Garmin GTN 650 Pilot's Guide - Page 46

2.5 Foreword Selecting a Squawk Code The selected squawk code will always be in use. As you change a squawk Getting Started code, the original code will be used until you are finished selecting the new code. Xpdr Ctrl Squawk Code Description Com/Nav 1200 Default VFR code in the USA 7500 Hijacking FPL 7600 Loss of Communications Direct-To 7700 Emergency Table 2-1 XPDR Special Squawk Codes Proc 1. Touch the transponder squawk code window at the right side Wpt Info of the display. 2. The XPDR page will be displayed. The Squawk Code value will Map be active for selection for use by the active Transponder. 3. Touch the numeric keypad, or use the rotary knobs, to select Traffic the desired Squawk Code. Terrain Weather Nearest 4. Then, touch Enter. Squawk Code Window Active XPDR Squawk Code Backspace Key Music Utilities System Messages Symbols Numeric Keypad Enter Key Figure 2-12 XPDR Squawk Code Selection Display 5. The selected Squawk Code will be shown in the XPDR window on the right side of the display. Appendix Index 2-6 Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B