Garmin GTN 650 Pilot's Guide - Page 258
Vertical Speed VS Profile, Target Offset
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
14.1.3 Vertical Speed (VS) Profile Foreword This value sets the vertical speed. Getting Started 1. While viewing the VCALC page, touch the VS Profile key. Xpdr Ctrl Com/Nav FPL Direct-To Proc Wpt Info Selected Vertical Speed Backspace Key Numeric Keypad Touch Enter Or Press Small Knob To Save Value Figure 14-7 Select VCALC Vertical Speed 2. Use the numeric keypad to select the desired Vertical Speed and then touch the Enter key. Map 14.1.4 Target Offset The Target Offset is a pilot-selected distance value that represents the Traffic geographical location where you wish to arrive at the target altitude. This distance is measured from the Target Waypoint and, in a separate data field on Terrain the VCALC page, designated as either before or after the Target Waypoint. Weather 1. While viewing the VCALC page, touch the Offset key. Nearest Music Utilities System Messages Symbols Selected Target Offset Backspace Key Numeric Keypad Touch Enter Or Press Small Knob To Save Number Figure 14-8 Select VCALC Target Offset 2. Use the numeric keypad to select the desired Target Offset and then touch the Enter key. Appendix Index 14-6 Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B