HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 162

DIAGMGR Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message DIAGMGR-4-FIXED_INTRVL_CHANGED: The users are not allowed to change monitoring interval of Test Explanation The specified health monitoring test interval is not user-configurable and therefore cannot be changed. Recommended Action No action is required.The specific health monitoring interval is not userconfigurable by design so nothing can be done to change the interval. DIAGMGR-5 Error Message DIAGMGR-5-BOOTUP_CONF: Diagnostic Bootup Level: Explanation Current Diagnostic BootUp Level being configure or changed. Recommended Action No action is required. Error Message DIAGMGR-5-CALLOC_FAILURE: Memory allocation failure Explanation Memory allocation in a call to malloc/calloc has failed. Recommended Action No action is required. Error Message DIAGMGR-5-CHANGE_ALWAYS_HM: Health Monitoring test in Module is a must run and cannot be modified Explanation The specified health monitoring test must be run and cannot be disabled. Recommended Action No action is required.The specific health monitoring test cannot be disabled by design. The system is working properly. Error Message DIAGMGR-5-HM_START: Health monitoring test for Module Explanation Health Monitoring Test started. Recommended Action No action is required. Error Message DIAGMGR-5-HM_STOP: Disabling health monitoring test for Module Explanation Health Monitoring Test has been stopped It can be enabled through the diagnostic monitor..... command. Recommended Action No action is required. 2-124 Cisco NX-OS System Messages Reference OL-15994-03