HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 90

BGP Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] Error Message BGP-3-FINDAGGR Format: [%s] Did not find aggregate path for entry %s/%d Explanation BGP was unable to find an internal datastructure for originating a configured aggregate. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-ILLARGS Format: %s called with illegal arguments Explanation An internal software error occurred. Parameters: Function ... Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-INTERNAL Format: Internal error %d: %s Explanation An internal software error occurred. Parameters: Error Type, Error ... Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-INVHDR Format: Peer %s sent unexpected header pattern Explanation The marker pattern in the message header was invalid. Recommended Action Check that the peer router is configured correctly. Clear the peer if necessary after any change. Error Message BGP-3-IPTOS Format: Unable to set IP TOS bits for %s, fd %d Explanation An unexpected but recoverable event has occurred. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-LIST Format: %s Explanation An internal software error occurred. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. 2-52 Cisco NX-OS System Messages Reference OL-15994-03