HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 87

Chapter 2 System Messages and Recovery Procedures BGP Messages Send document comments to [email protected] Error Message BGP-3-ASSERT Format: %s:%d: Assertion `%s' failed. Explanation An internal software error occurred. Parameters: File Name, Line Number, Assert Type ... Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-ATTRAVL_OP Format: Failed attribute external database operation: %s, id %lu Explanation BGP was unable to perform an attribute external database operation Parameters: Operation, Attr ID ... Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-ATTRID_OP Format: Failed to %s attribute ID Explanation BGP was unable to allocate or free an index for a BGP PATH attribute block Parameters: Allocate or free ... Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-BADPEERAS Format: VRF %s, Peer %s - bad remote-as, expecting %s received %s. Explanation The system has detected an error when prepending to an AS path. Parameters: Segment Type, Segment Length ... Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message BGP-3-BRIB_ADD_INT Format: Internal error in adding to BRIB: %s Explanation An internal error has occurred when the system attempted to a path to the BRIB. The BGP process may have run out of memory. Parameters: Error ... Recommended Action If BGP ran out of memory, add memory to the router or change the network configuration to decrease memory requirements. Clear any BGP peers that may have been shut down automatically. If BGP has available memory, restart BGP. OL-15994-03 Cisco NX-OS System Messages Reference 2-49