HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 269

Chapter 2 System Messages and Recovery Procedures FWM Messages Send document comments to [email protected] Error Message FWM-1-FCFIB_HW_NO_VSAN: No hardware [chars] resources for route creation to VSAN [dec] Explanation Hardware does not have sufficient resources to create this route. Recommended Action Delete unused VSANs. Error Message FWM-1-FCFIB_HW_NO_VSAN_DOM: No hardware [chars] resources for route creation to VSAN [dec] Domain [dec] Explanation Hardware does not have sufficient resources to create this route. Recommended Action Delete unused VSANs or assign common Domain numbers to existing VSANs. Error Message FWM-1-FCFIB_HW_PC_LIMIT: Failed to create [chars], hardware limit of [dec] would be exceeded Explanation The number of hardware SAN Port Channels is limited by the platform. Recommended Action Configure fewer SAN Port Channels. FWM-2 Error Message FWM-1-FCFIB_LICENSE_UNAVAILABLE: License: [chars] is not installed. System will not provide FC switching. Explanation Fibre Channel license is unavailable. The system will not provide FC switching. Recommended Action Install the license file to continue using the feature. Error Message FWM-2-FCFIB_CRIT: [chars] Explanation Fcfib encountered a catastrophic error. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message FWM-2-FWM_ASSERT_FAILURE: stack [[chars]] Explanation Critical assertion has failed in forwarding manager. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. OL-15994-03 Cisco NX-OS System Messages Reference 2-231