HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 855

Chapter 2 System Messages and Recovery Procedures WWN Messages Send document comments to [email protected] WWN-1 WWN-2 Error Message WWN-1-TYPE1_ALERT: [dec] (< [dec] %) Remain Explanation The WWN Manager has run out of WWNs. No new dynamically allocated WWNs are available. However, statically assigned WWNs such as switch WWN, port WWN, etc. are still available. Recommended Action Please add additional WWNs by programming a new Secondary MAC address and its range. Error Message WWN-1-TYPES2_5_ALERT: [dec] (< [dec] %) Remain Explanation The WWN Manager has run out of WWNs of NAA Types 2 and 5. Recommended Action Please add additional WWNs by programming a new Secondary MAC address and its range. Error Message WWN-2-BKPLN_PROM_CANT_READ: Can not read backplane PROM Explanation The WWN Manager has failed to read chassis information. No dynamic WWNs could be allocated. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Error Message WWN-2-EXITING: Exited due to [chars] Explanation The WWN Manager process has exited due to [char]. The process has probably been restarted automatically. Recommended Action No action is required. Error Message WWN-2-GENERAL_ERROR: [chars] Explanation The WWN Manager has encountered a critical error. The description of the error is [str.]. Recommended Action No action is required. OL-15994-03 Cisco NX-OS System Messages Reference 2-817