HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 654

SPAN Messages Chapter 2 System Messages and Recovery Procedures Send document comments to [email protected] SPAN-2 SPAN-3 Error Message SPAN-2-MEM_FULL: Memory allocation failed Explanation Memory allocation failed. Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. SPAN-5 Error Message SPAN-3-IPC_FAIL: IPC Error Explanation Internal IPC error. Recommended Action No action is required. Error Message SPAN-3-SYSINFO_TIMEOUT: Span timed out waiting for response from port manager for sys info Explanation Span request for critical system information from port manager timed out. So, span on the new active is exiting and system manager will restart Span. Recommended Action No action is required. Error Message SPAN-5-ATL_VSAN_DEFAULT_ALL: Default to all VSANs for SPAN egress session Explanation Generation 2 fabric switches support only one VSAN filter for egress SPAN session. If no or more than one VSANs are specified, SPAN will default to use all VSANs for the egress SPAN session. Recommended Action No action is required. Error Message SPAN-5-SPAN_CFG_REJECT_SRC_VSAN_FILTER_NOT_SUPPORTED: Source interface [[chars]] in dir [[chars]] removed from session [[dec]]. Explanation Interface level VSAN filters are not supported. Recommended Action No action is required. 2-616 Cisco NX-OS System Messages Reference OL-15994-03