HP Cisco Nexus 5000 Cisco NX-OS System Messages Reference (OL-15994-03, July 2 - Page 511

Chapter 2 System Messages and Recovery Procedures PLATFORM Messages Send document comments to [email protected] PLATFORM Messages This section contains the PLATFORM messages. PLATFORM-0 Error Message PLATFORM-0-CHASSIS_CLKSW_MODULE_RESET: Modules reset due to clock switch Explanation Chassis clock source has switched and all Vegas line cards will be reset. The system will automatically continue using redundant clock module. Recommended Action Refer to the platform document on clock modules. Error Message PLATFORM-0-CHASSIS_CLKSWITCH: Hardware clock switched to redundant clock-[dec] Explanation Clock module on chassis deteted a failure and switched to redundant clock module. Recommended Action Enter the 'the show platform internal command rmationcommandrmationcommand' to collect more information. Error Message PLATFORM-0-CHASSIS_CLKSWRESET: Switch reset due to clock switch Explanation Chassis clock source has failed and system will be reset. The system will automatically start using redundant clock module. Recommended Action Refer to the platform document on clock modules. Error Message PLATFORM-0-FAIL_REMOVED: Fan module removed. Fan[dec] has been absent for [dec] seconds Explanation Fan module is removed. This could lead to temperature alarms. Recommended Action Replace the fan module as soon as possible. Error Message PLATFORM-0-MOD_TEMPMAJALRM: [chars] reported Major temperature alarm. Sensor=[dec] Temperature=[dec] MajThreshold=[dec] Explanation Module in slot [decimal digit] exceeded major temperature threshold. Recommended Action Enter a 'show env temperature' to collect more information. OL-15994-03 Cisco NX-OS System Messages Reference 2-473